March 16, 2020

Engine harness issues see Range Rover Evoque recalled again

ACCC overseeing second recall of some Range Rover Evoque SUVs…

A possibly dangerous fault has been identified in certain current series Range Rover Evoque SUVs and it’s been found a previous fix hasn’t been sufficient.

The subject of an official recall being overseen by the Australian Competition and Consumer Commission (ACCC), affected vehicles are powered by the 2.0 litre diesel engine and were sold in Australia between the 1st of November 2015 and the 31st of January 2016.

Those vehicles all carry a VIN within this range - SALVA2AN4GH07910 to SALVA2BNXGH099325.

The recall notice advising that the routing of the engine harness may not provide sufficient clearance and as a result, allow contact with the Exhaust Gas Recirculation (EGR) casting bracket.

Vehicles included in a previous safety Recall P075 (details here) have received a modification which has subsequently been determined as not durable for the life of the vehicle.

As a result, the engine harness contact with the EGR casting bracket can cause the wires within the engine harness protective sleeve to wear through, exposing the actual wires which may short circuit to the metal bracket added as part of the Recall P075 repair.

What are the hazards?

There is potential that any circuit within the engine harness could be compromised due to this chafing condition or contact, which could result in a range of vehicle failure modes, including engine cut out whilst in motion.

If the engine cuts out, the brake vacuum reservoir will be depleted and the vehicle will lose brake power assistance.

Foundation brakes will continue to operate and this may pose a safety risk to the vehicle occupants and other road users.

Owners of affected vehicles will be contacted by direct mail and asked to contact their preferred Jaguar Land Rover dealer to arrange an appointment to inspect the engine harness and if required, complete harness repairs.

The dealer will also attach a revised extension to the existing bracket to ensure the correct engine harness routing.

About Joel Helmes 3181 Articles
Joel is the founder and CEO of Behind the Wheel. Joel has a background as a radio broadcaster with on-air roles at 4BC, 4KQ, 2KY, 2LT and 2UE amongst others, as well as a news editor and program director.Joel’s relationship with cars stems back to his early childhood learning to change oil and brakes with his father and uncle. This continued on into his driving years owning an assorted collection of cars.

Be the first to comment

Leave a Reply

Your email address will not be published.